Hướng dẫn sử dụng bồn rửa mắt và tắm khẩn cấp UK306

EMERGENCY EYE WASH AND SHOWER

Model: UK306

(Instruction Book)

 

Please check the fittings according to the table below. If there is damage or the quantity is not correct please contact the distributor in your area or contact our company directly, you will get prompt

response.

 

NO.	Name	Quantity
1	Sprayers head	1set
2	Drench hose	1set
3	Up part	1set
4	Down part	1set
5	Bottom Bracket	1pc
6	Eye Wash Basin	1set
7	Eye Wash Sprayer	1set
8	Pull rob	1set
9	Push board	1pc
10	Spare parts	1bag
11	Foot pedal	1bag

 

*USAGE

 

The emergency eye washer have already been adopted extensively by the most factories and the laboratories of   the developed industrial countries of foreign countries，it is   the   indispensable apparatus of the security and the labour protection. It can make use of reducing the injure of acid， alkali, organic matter and other poisonous corrosive material. It can be extensivelyapply to petrochemical industry chemical industry, semiconductor industry, medical manufacturing industry, etc.

 

*MAIN FUNCTION PARAMETERS

 

Pressure			Flux L/Min		Temperature
Nominal pressure	Seal pressure	Working pressure	Shower	Eye wash	Tepid water
0.4	0.45	0.20-0.80	≥78.5	≥16.5

Choosing these data is considering the hurt to the skin, eye(s), when accidents happen.

 

*STRUCTURE

 

1. The ceramic and ball valve controls spray and eye wash respectively. It is easily operate and you may assure the quality.
2. The spray head: using the ABS and brass to mould, coming to incorporate, in-built the spumes instrument, having filtration cotton and dust shield, the dust cup can clean the dust usually, removed automatically when eye wash is operate, to debase the hydraulic pressure when to be open abruptly, so as to protect eyes.

 

*MAIN MATERIAL

 

1.coating: yellow, green, red

2.Pipe: galvanization steel pipe with resistant to rust in the inside of pipe.

3.eye wash bowl and shower sprayer head: ABS.

 

*INSTALLATION AND MAINTENANCE

 

1. You should check the type of products, nstruction and the packing list for another time.
2. The location of the emergency equipment should be installed within 10 seconds walking time or

 

15 meters from the hazard.3. Assembling the various components referring to sketch map, the contaction between various components needed to wind sealing belt, connected water source according to the diameter of inlet pipeline and outline pipeline.

4. After connecting the drain pipe, to see whether it moves well.

 

*METHOD OF APPLICATION:

 

1. Please pull down the pull rob, when you need shower, and the shower sprayer will open, when push up the pull rob, the shower sprayer will shut-off.
2. Please push the board clockwise, when you need eye washing, and the eye wash sprayer will work; when pullback the board widdershins, the eye wash sprayer will shut-off.

 

*MAINTENANCE

 

1. This facility is just used for emergency washing, do not use for shower. Please check the facility according to the rules and regulars. Make sure the facility will work well when there are accidences.
2. Activate shower  at  least  weekly,  to  ensure  the  equipment  dependability and  validity.  This equipment can not provide medical treatment; it can just reduce the hurt to the minimum degree by washing.
3. When an accident happens, please decide the showering time according to the hurt and prepare the medical treatment.

*THE CONK OUT AND SOLUTIONS

 

No.	Conk out	Cause	Solution
1	The shower outlet flux is small	A the diameter of inlet pipe is small B the filter has foreign objects	A   change   the   inlet pipe B remove the foreign objects
2	The eye wash sprayer outlet flux is small	A the adjustment rob is overdo B the adjustment valve is blocked	A     turn     the     rob anti-clockwise B wash the valve
3	The eye wash sprayer outlet flux is large	The adjustment rob is under-do	Turn         the         rob clockwise
4	The seep in the basin is more	The outlet is blocked	Remove   the   foreign object

 

Tải hướng dẫn sử dụng tại đây: Instruction Book UK306